Formula Spec Clone - Assembly Notes... * Notes are in NO particular order.

[NYKA.US]

This section of the forum will be dedicated to an actual Formula Spec Clone build project.
We will be adding photos, notes, and instructions for the build/assembly project.

* Notes are in NO particular order.

Step1 - We recommend that the chassis and components be completely assembled before painting of the frame or other parts.
This will insure that you have all the parts in the proper places, and any drilling or fitting is done before you go to paint.

Drilling and fitting:
Some parts are pre-drilled at the factory, and some need to be drilled after proper fitting.
Side nerfbars need to be fitted and then drilled for for 3/16" clevis pins.
Steering uprights drilled for bolts.
The main frame needs the rear bumper fitted and then cross drilled for 3/16" clevis pins.